1.
Refoeving
cut
33
. 2. Cross art
34
blowdown area, ill. 35). Worldng
in
blowdown areas
is
extremely hazardous.
7.
Drag the logs into a clear area before cutting. Pull out
exposed and cleared logs
first.
Maintenance BDd Repair
Never operate a chain saw that is damaged, improperly
adjusted
Of
not completely or securely assembled. Follow
the maintenance and repair.instructions
in
the appropriate
section of your
Owne~s
Manual.
warning!
Always stop the engine and make sure that the chain is
stoppe.d
before doing any maintenance or repair
wor!<
or
cleaning the saw.
Do
not attempt any maintenance or
repair
wor!<
not described in your
Own~s
Manual. Have
such work performed at your STlHL service shop orily.
MAINTAINING
AND
STORING
THE
SAW
Keep the chain, bar and sprocket clean and lubricated;
replace worn sprockets or chains.
Keep the chain sharp.
You
can spot a dull chain when
easy-to-cut wood beccmes hard to cut and bum marks
appear
on
the wood.
Keep the chain at proper tension. Tighten all nuts, bolts
and
screws
except
the
carburetor
adjustment
screws
after
each
use.
Keep
spar!<
plug
and
wire connection tight and clean.
Store saws
In
a high or locked place, away from children.
19
To Next Page
Loading...
Need help?
General
