Stihl BR 600 User Manual

BR 500, BR 550, BR 600
English
19
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
If there is a noticeable loss of engine
power
N Turn the choke knob to l.
N Loosen the screws (1).
N Remove the filter cover (2).
N Remove the filter element (3).
N Replace dirty or damaged filters.
N Fit the new filter in the filter housing.
N Fit the filter cover.
N Insert the screws and tighten them
down firmly.
Machines without Adjustable Carburetor
On certain machine versions it is no
longer necessary to adjust the
carburetor. Such machines have no
setting symbol on the shroud.
These machines have been set at the
factory to provide an optimum fuel-air
mixture in all locations and operating
conditions.
Adjusting Idle Speed
Engine stops while idling:
N Turn the idle speed screw (LA)
slowly clockwise until the engine
runs smoothly.
Machines with Adjustable Carburetor
The carburetor comes from the factory
with a standard setting.
This setting provides an optimum fuel-air
mixture under most operating
conditions.
With this carburetor it is only possible to
adjust the high speed and low speed
screws within fine limits.
Replacing the Air Filter Adjusting the Carburetor
452BA105 KN
H
L

Stihl BR 600 Specifications

General

Type	Backpack blower
Airflow	1150 m³/h
Airspeed	320.4 km/h
Suction mode	-
Airspeed (max)	381.6 km/h
Shoulder strap	Yes
Power source	Gasoline
Sound power level	108 dB
Vibration emission	2.5 m/s²
Sound pressure level	100 dB

Weight and Dimensions

Weight	10200 g