Stihl BR 600 User Manual

BR 500, BR 550, BR 600
English
21
Checking the Spark Plug
N Clean dirty spark plug.
N Check electrode gap (A) and
readjust if necessary – see
"Specifications".
N Rectify the problems which have
caused fouling of the spark plug.
Possible causes are:
– Too much oil in fuel mix.
– Dirty air filter.
– Unfavorable running conditions.
WARNING
Arcing may occur if the adapter nut (1) is
loose or missing. Working in an easily
combustible or explosive atmosphere
may cause a fire or an explosion. This
can result result in serious injuries or
damage to property.
N Use resistor type spark plugs with a
properly tightened adapter nut.
Installing the spark plug
N Screw the spark plug (3) into the
cylinder and fit the boot (2) (press it
down firmly).
For periods of 3 months or longer
N Drain and clean the fuel tank in a
well ventilated area.
N Dispose of fuel properly in
accordance with local
environmental requirements.
N Run the engine until the carburetor
is dry – this helps prevent the
carburetor diaphragms sticking
together.
N Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
N Store the machine in a dry, high or
locked location, – out of the reach of
children and other unauthorized
persons.
000BA039 KN
A
1
000BA045 KN
3
002BA178 KN
2
Storing the Machine

Stihl BR 600 Specifications

General

Type	Backpack blower
Airflow	1150 m³/h
Airspeed	320.4 km/h
Suction mode	-
Airspeed (max)	381.6 km/h
Shoulder strap	Yes
Power source	Gasoline
Sound power level	108 dB
Vibration emission	2.5 m/s²
Sound pressure level	100 dB

Weight and Dimensions

Weight	10200 g