EasyManuals Logo
Home>Stihl>Trimmer>FS 235 R

Stihl FS 235 R User Manual

Stihl FS 235 R
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
If you are using a metal cutting attachment:
0000-GXX-7834-A0
Hold the trimmer firmly with your right hand on
the control handle – wrap your thumb around
the handle.
Hold the trimmer with your left hand on the
loop handle – wrap your thumb around the
loop handle.
11.3 Mowing
The cutting height is determined by the distance
of the cutting attachment from the ground.
A B
0000-GXX-7835-A1
Mowing with a mowing head (A)
Swing the brushcutter steadily back and forth
in an arc.
Move forward slowly in a controlled manner.
Mowing with a grass cutting blade (B)
Mow with the left-hand side on the metal cut‐
ting attachment.
Move forward slowly in a controlled manner.
11.4 Adjusting Nylon Line
11.4.1 Line Feed on AutoCut Mowing Head
Tap the rotating mowing head on the ground.
About 30 mm of fresh nylon line is advanced.
The line limiting blade in the deflector trims the
mowing lines to the correct length.
1
2
0000-GXX-4037-A1
Automatic feed does not operate if the mowing
lines are shorter than 25 mm.
Shut off the engine.
Depress the spool (1) on the mowing head
and hold it depressed.
Pull out the mowing lines (2).
If the mowing lines (2) cannot be pulled out to
the required length: Replace the spool (1) or
the mowing lines (2).
The spool is empty.
11.4.2 Line Feed on SuperCut Mowing
Heads
Mowing lines are adjusted automatically. The line
limiting blade in the deflector trims the mowing
lines to the correct length.
Automatic feed will not take place if the mowing
lines are shorter than 40 mm.
Shut off the engine.
Pull out the mowing lines.
If the mowing lines cannot be pulled out to
required length: Replace nylon line.
The spool is empty.
12 After Finishing Work
12.1 When Work is Finished
Shut off the engine.
Allow trimmer to cool down.
If the brushcutter is wet: Allow the brushcutter
to dry.
Clean the brushcutter.
Clean the deflector.
Clean the cutting attachment.
If a metal cutting attachment is mounted: Fit
the matching transport guard.
13 Transporting
13.1 Transporting the Trimmer
Shut off the engine.
If a metal cutting attachment is mounted: Fit
the matching transport guard.
12 After Finishing Work English
0458-500-0121-B 17

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl FS 235 R and is the answer not in the manual?

Stihl FS 235 R Specifications

General IconGeneral
BrandStihl
ModelFS 235 R
CategoryTrimmer
LanguageEnglish

Related product manuals