FS 240, FS 240 C, FS 240 R, FS 240 RC, FS 260 R, FS 260 RC
English
40
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Replace any damaged parts XX
Control handle Check operation XX
Air filter, paper filter
Visual inspection XX
Replace
1)
X
Air filter, synthetic fabric filter
Visual inspection XX
Clean X
Replace XX
Fuel tank Clean XXX
Manual fuel pump (if fitted)
Check X
Repair
2)
X
Pickup body in fuel tank
Check
2)
X
Replace
2)
XXX
Carburetor
Check idle adjustment – the cutting
attachment must not rotate
XX
Adjust idle speed X
Spark plug
Adjust electrode gap X
Replace after every 100 operating hours
Cooling inlet
Visual inspection X
Clean X
Cylinder fins Clean
2)
X
Exhaust port
Decoke after first 139 hours of opera-
tion, then every 150 hours of operation
2)
X