FSA 65, FSA 85
English
44
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
Move the retaining latch to
ƒ before performing any work on the power tool.
before starting work
after finishing work or daily
weekly
monthly
every 12 months
if problem
if damaged
if required
Complete machine
Visual inspection (condition) X
Clean X
Controls (retaining latch, trigger switch
lockout, trigger switch)
Check operation X
Clean XX
All accessible screws and nuts Retighten X
Battery Visual inspection XXX
Battery compartment
Clean X X
Check operation (eject battery) X
Cutting attachment (mowing head)
Visual inspection X
Replace X
Check tightness X
Safety labels Replace X
To Next Page
Loading...
Need help?
General
