HT 105, HT 134, HT 135
English
44
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Cutting attachments HT 134, HT 135
Rollomatic E Mini / Rollo Light 01 guide
bars
Actual cutting length will be less than
listed bar length.
Saw chain 3/8" P
Chain sprocket
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers
using genuine STIHL replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
For repairs of any component of this
unit’s air emissions control system,
please refer to the air emissions
systems warranty in this manual.
Contact the local authorities or your
STIHL servicing dealer for information
on disposal.
Improper disposal can be harmful to
health and pollute the environment.
N Take STIHL products including
packaging to a suitable collection
point for recycling in accordance
with local regulations.
N Do not dispose with domestic
waste.
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 25, 30, 35 cm (10, 12,
14 in.)
Pitch: 3/8" P (9.32 mm)
Groove width: 1.1 mm (0.043 in.)
Low kickback STIHL saw chain (with
green label)
Picco Micro Mini 3 (61 PMM3)
Type 3610
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.1 mm (0.043 in.)
7-tooth for 3/8" P
Maintenance and Repairs Disposal
To Next Page
Loading...
Need help?
General
