Always read and and make sure you
understand both instruction manuals
(basic power tool and attachment)
before using your power tool for the
first time and keep them in a safe
place for future reference. Non-com‐
pliance with the user manuals may
cause serious or even fatal injury.
Lend or rent your power tool only to persons who
are familiar with this model and its operation – do
not lend of rent your power tool without the
instruction manuals of the basic power tool and
attachment.
Use your hedge trimmer only for cutting hedges,
shrubs, bushes, scrub and similar materials.
The machine must not be used for any other pur‐
poses – risk of accidents!
Only use cutting blades and accessories that are
explicitly approved for this power tool by STIHL
or are technically identical. If you have any ques‐
tions in this respect, consult your dealer.
Use only high-quality parts and accessories. This
avoids the risk of accidents and damage to the
machine.
STIHL recommends the use of genuine STIHL
tools, cutting attachments and accessories. They
are specifically designed to match the product
and meet your performance requirements.
Never attempt to modify your power tool in any
way since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
Do not use a high-pressure washer to clean the
power tool. The solid jet of water may damage
parts of the unit.
3.1 Clothing and equipment
Wear proper protective clothing and equipment.
Clothing must be robust but allow
complete freedom of movement.
Wear close-fitting clothes such as a
boiler suit, not a loose jacket.
Do not wear clothing which could become trap‐
ped in wood, brush or moving parts of the
machine. Do not wear a scarf, necktie or jewelry.
Tie up and confine long hair above your should‐
ers.
Wear safety boots with steel toe caps
and non-slip soles.
WARNING
To reduce the risk of eye injuries,
wear close-fitting safety glasses in
accordance with European Standard
EN 166. Make sure the safety
glasses are a snug fit.
Wear "personal" sound protection, e.g. ear
defenders.
Wear a safety hard hat where there is a danger
of head injuries from falling objects.
Wear sturdy protective gloves made
of a resistant material (e. g. leather).
STIHL can supply a comprehensive range of per‐
sonal protective equipment.
3.2 Transporting the machine
Always stop the engine.
Always fit the blade guard (scabbard) – even
when carrying the unit short distances.
For machines with adjustable cutter bar: Engage
the cutter bar.
For machines with a defined transport position:
Bring the cutter bar in transport position and
have it engaged.
Carry the power tool properly balanced by the
shaft – cutting blades behind you.
Avoid touching hot parts of the machine and
gear housing – risk of burns!
By vehicle: When transporting in a vehicle, prop‐
erly secure your machine to prevent tipping over,
damage and fuel spillage.
3.3 Before starting
Check that your power tool is properly assem‐
bled and in good condition – refer to appropriate
chapters in the instruction manuals of the basic
power tool and attachment.
–
Cutting blades: Correctly assembled, securely
mounted and in good condition (clean, move
freely, not warped), properly sharpened and
sprayed thoroughly with STIHL resin solvent
(lubricant).
–
For machines with adjustable cutter bar: The
adjustment mechanism must be snapped into
the start position
–
For machines with a defined transport position
(cutter bar folded against the shaft): Never
start the machine in the transport position
3 Safety Precautions and Working Techniques English
0458-401-0121-E 3
To Next Page
Loading...
Need help?
General
