0458-687-0121-A
14
English
11 Checking KombiEngine and Battery
► If the KombiTool continues to run: Remove the battery and
contact your STIHL dealer for assistance.
The KombiEngine is defective.
11.1 Checking the controls
Trigger lockout and trigger
► Remove the battery.
► Try pressing the trigger without pressing the trigger
lockout.
► If the trigger can be pulled: Do not use your KombiEngine
and contact your STIHL servicing dealer for assistance.
The trigger lockout is faulty.
► Press and hold the trigger lockout.
► Squeeze and release the trigger.
► If the trigger or trigger lockout is stiff or does not spring
back to the idle position: Do not use your KombiEngine
and contact your STIHL dealer for assistance.
The trigger or the trigger lockout is defective.
Switching on the KombiEngine
► Insert battery.
► Press and hold the trigger lockout.
► Push the release slide in the direction of the loop handle
with your thumb.
► Press and hold the trigger.
The KombiTool runs.
► If 3 LEDs on the battery flash red: Remove the battery and
contact your STIHL dealer for assistance.
There is a malfunction in the KombiEngine.
► Release the trigger.
The KombiTool stops running.
► If the KombiTool continues to run: Remove the battery and
contact your STIHL dealer for assistance.
The KombiEngine is defective.
11.2 Testing the Battery
► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use the battery
and contact your STIHL servicing dealer.
There is a malfunction in the battery.
12.1 Holding and Controlling the KombiMotor
The correct way of holding and controlling the KombiMotor
depends on the KombiTool you are using.
► Hold and control the KombiMotor as described in the
instruction manual supplied with the KombiTool.
12.2 Setting the performance level
Depending on the application, 3 power levels can be set.
The LEDs indicate the selected power level. The higher the
power level, the faster the KombiTool can run.
The selected power level affects the battery’s runtime. The
lower the power level, the longer the runtime.
► Press and hold the trigger lockout (1).
► Push the release slide (2) in the direction of the loop
handle with your thumb and hold it there.
The LEDs emit light to indicate the power level selected.
11 Checking KombiEngine and Battery
12 Operating the KombiMotor
1
2
0000097100-001