Stihl MS 193 T User Manual

MS 193 T
English
12
Disengaging the chain brake
N Pull the hand guard (4) towards the
control handle until there is an
audible click – the chain is
disengaged.
Removing the chain sprocket cover
N Unscrew the nut (5) and remove the
cover (6).
Mounting the guide bar
N Turn the screw (7)
counterclockwise until the tensioner
slide (8) butts against the left end of
the housing slot.
N Fit the guide bar over the stud (9)
and engage the peg of the tensioner
slide in the hole (10).
Fitting the Chain
WARNING
Wear work gloves to protect your hands
from the sharp cutters.
N Fit chain around the sprocket (11)
and over the guide bar – the cutting
edges on top of the bar must point to
the bar nose.
N Turn the screw (7) clockwise until
there is very little chain sag on the
underside of the bar – and the drive
link tangs are engaged in the bar
groove.
Mounting the Bar and Chain
467BA001 KN
4
5
6
142BA058 KN
142BA059 KN
7
8
142BA060 KN
10
9
11
142BA061 KN
7
142BA062 KN

Stihl MS 193 T Specifications

General

Brand	Stihl
Model	MS 193 T
Category	Chainsaw
Language	English