Name: Stihl MS 201 C-M
Brand: Stihl
Rating: 5 (1 reviews)

To Next Page

To Previous Page

MS 201 C-M

English

N Push the filler cap down and twist it

clockwise until it engages.

Then the markings on filler cap and

housing will align.

N Flip the handle down.

Filler cap is now closed.

If the filler cap will not engage into the

tank housing

The base of the filler cap is rotated in

relation to the upper part.

N Look at the black alignment marks

on the top of the filler cap.

N With the filler cap in the filling neck,

twist it counterclockwise until it

drops into its seat.

N Continue to twist the filler cap

counterclockwise (approx. 1/4 turn)

– this will twist the base of the cap

into the correct position.

N While pushing down on the cap,

twist the filler cap clockwise and

close it – see section "Closing."

001BA233 KN

001BA231 KN

001BA235 KN

Left: Base of filler cap is rotated –

interior marking (1) is aligned

with the exterior marking.

Right: Base of filler cap is in the cor-

rect position – interior

marking is below the clip. It

does not align with the exte-

rior marking.

001BA241 KN

001BA238 KN

001BA239 KN

Questions and Answers:

Need help?

Do you have a question about the Stihl MS 201 C-M and is the answer not in the manual?

Stihl MS 201 C-M Specifications

General