Stihl MS 291 C User Manual

MS 261 C-M
English
24
Preparing the machine
N Before fueling, clean the cap and
the area around it to ensure that no
dirt falls into the fuel tank
N Always position the machine so that
the cap is facing upwards
Opening
N Raise grip to vertical position.
N Turn the cap counterclockwise
(about a quarter turn).
Marks on tank cap and fuel tank must
line up.
N Remove the tank cap.
Filling Up with Fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for fuel (special accessory).
N Fill the fuel tank.
Closing
Grip must be vertical:
N Fit the cap – marks on tank cap and
fuel tank must line up.
N Press the cap down as far as stop.
N While holding the cap depressed,
turn it clockwise until it engages in
position.
The marks on the tank cap and fuel tank
are then in alignment.
Fueling
001BA229 KN
001BA236 KN
001BA232 KN
001BA234 KN
001BA237 KN
001BA234 KN
001BA233 KN
001BA231 KN

Stihl MS 291 C Specifications

General

Brand	Stihl
Model	MS 291 C
Category	Chainsaw
Language	English