MS 261 C-M
English
44
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, resin-
rich wood, tropical wood, etc.), shorten the specified intervals accordingly. If you only
use your power tool occasionally, extend the intervals accordingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required
Complete machine
Visual inspection (condition, leaks) X X
Clean X
Throttle trigger, trigger lockout, choke
lever, stop switch, Master Control lever
(depending on version)
Check operation XX
Chain brake
Check operation XX
Have checked by dealer
1)
X
Manual fuel pump (if fitted)
Check X
Have repaired by servicing dealer
1)
X
Pickup body/filter in fuel tank
Check X
Clean, replace filter element XX
Replace XXX
Fuel tank Clean X
Chain oil tank Clean X
Chain lubrication Check X
Saw chain
Inspect, also check sharpness XX
Check chain tension. XX
Sharpen X
Guide bar
Check (wear, damage) X
Clean and turn over X
Deburr X
Replace XX
Chain sprocket Check X
Air filter
Clean XX
Replace X
To Next Page
Loading...
Need help?
General
