RMA 510
English
27
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work
-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
Always remove the battery and fuse key before working on the power tool.
before starting work
after finishing work or daily
weekly
monthly
every 12 months
if problem
if damaged
as required
Complete unit
Visual inspection (condition) X
Clean X
Have serviced by dealer
1)
XXX
Controls (switch lever, switch lever
lockout)
Check operation X
Clean XX
Battery Visual inspection XXX
Battery compartment
Clean XX
Check operation (eject battery) X
Cutting blade
Visual inspection X
Clean XX
Sharpen
1)
X
Replace XX
Coasting brake Check operation X
All accessible screws and nuts Retighten X
Safety labels Replace X
1)
STIHL recommends an authorized STIHL servicing dealer.