SG 11 , SG 11 PLUS
English
9
Releasing Pressure in Tank
N Turn the knurled wheel (1) as far as
stop and hold it there until the tank
is no longer under pressure.
Emptying Tank and Cleaning the
Sprayer
N Empty the tank in a well ventilated
location.
N Rinse the tank with clean water.
N Fill the tank with clean water.
N Fit the cover on the tank and tighten
it down firmly.
N Pressurize the tank and continue
spraying until the tank is empty and
no longer under pressure.
Lubricating the O-rings
N Unscrew the pump barrel and pull it
off the piston.
After frequent use, lubricate the
following O-rings with food-safe grease:
– O-ring (1) between pump barrel and
cover.
– O-ring (2) on pump piston.
N Seat of O-ring (1) between pump
barrel and cover.
N Slide the piston into the pump
barrel. Screw the pump barrel into
the cover and tighten it down firmly.
Cleaning the Nozzle
N Rinse the nozzle under running
water.
After Spraying
1
0076BA009 AS
Inspection and Maintenance
by User
0076BA013 ST
1
2
To Next Page
Loading...
Need help?
General
