Stryker CrossFlow Quick Start Guide

TEMPERATURE MONITORING SETTINGS
Temperature monitoring settings
How to select temperature monitoring and mitigation settings for use with SERFAS probes.
Step 1: Access settings menu Step 2: Customize temperature
monitoring
Step 3: Return to run screen
Return to run screen
= Exit menu
NOTE: Temperature monitoring is only available
with CrossFire 2 using SERFAS suction RF probes.
The temperature settings are now customized.
= Temperature monitoring
sub-menu
Press:
= For temperature
monitoring, display and
mitigation actions
= For temperature
monitoring and display
with no mitigation
actions
= For no temperature
monitoring, display or
mitigation actions
9
Refer to the instructions for use for important safety and user advice. Do not operate the device without rst reading and understanding the Instructions for Use.
10
Monitoring & Mitigation
Monitoring Only
Off
Temperature indication is displayed
= Pump customization menu

Stryker CrossFlow Specifications

General

Brand	Stryker
Model	CrossFlow
Category	Water Pump
Language	English