Stryker System 7 User Manual

6 www.stryker.com
EN 7205-001-700 Rev-AA
Definitions
The symbols located on the equipment and/or labeling
are defined in this section or in the Symbol Definition
Chart. See the Symbol Definition Chart supplied with
the equipment.
SYMBOL DEFINITION
Forward Trigger or Reverse Trigger –
(conditional symbol; action is in the
direction of the arrow)
Forward Trigger or Reverse Trigger –
(conditional symbol; action is in the
direction of the arrow)
Drill Mode
Ream Mode
F/R 1 min / 4
min x 3
OSC 15s/15s
x 5
Duty Cycle – See the Specifications
section.
General warning sign
To comply with European Community
Waste Electrical and Electronic
Equipment (WEEE) Directive 2012/19/
EU, ALWAYS collect this product
separately for recycling. DO NOT
dispose of this product as unsorted
municipal waste. Contact your local
distributor for disposal information.
Direct current
Instructions
To Install the Attachment and Accessory
WARNING: ALWAYS slide the function switch
to the safe mode position before installing the
attachment or accessory.
NOTE: See the Heavy Duty Rotary Handpiece
Attachments Instructions For Use manual for specific
attachment and accessory instructions.
1. Insert the attachment into the handpiece until the
attachment snaps into place.

Stryker System 7 Specifications

General

Brand	Stryker
Model	System 7
Category	Tools
Language	English