Sub-Zero 427G User Manual

Wine Storage 3
subzero.com
Sub-Zero Wine Storage
T
he importance of the installation of the Sub-Zero wine
storage unit cannot be overemphasized. Installation
should be done by a qualified installer.
Before you begin the installation process, it is recom-
mended that you read this entire installation guide. There
are key details that you should take special care to
observe during the installation. By reading these instruc-
tions carefully, you will make the installation process
easier, problem-free and, most importantly, safe.
Any questions or problems regarding the installation
should be directed to your authorized Sub-Zero dealer or
Sub-Zero customer care at 800-222-7820. You may also
check the contact & support sectionofour website,
subzero.com.
Important product information, including the model and
serial number of your unit are listed on the product rating
plate. For models 424G and 424FSG, the rating plate is
located on the underside of the top wall. For models
427G, 427RG and WS-30, it is attached to the underside
of the control panel. Refer to the illustrations.
Models 424G and 424FSG.
RATING PLATE
Models 427G, 427RG and
WS-30.
R
ATING PLATE

Sub-Zero 427G Specifications

General

Brand	Sub-Zero
Model	427G
Category	Wine Cooler
Language	English