EasyManuals Logo
Home>Sub-Zero>Refrigerator>IT-36CI

Sub-Zero IT-36CI User Manual

Sub-Zero IT-36CI
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
|
Sub-Zero Customer Care 800.222.7820
Custom Panels
For integrated models, custom door panels and handle
hardware must be installed. Stainless steel panels are
available through an authorized Sub-Zero dealer. For local
dealer information, visit the nd a showroom section of our
website, subzero.com.
The thickness of the custom panel can vary. A minimum
5
/8" (16) thick panel is required, but the thickness can be
increased provided it does not exceed the maximum panel
weight indicated in the chart below. The depth of each
integrated model is 24"
(610). Allow for panel thickness when
planning the nished opening depth.
PANEL REQUIREMENTS
COLUMN MAX WEIGHT
18" Models 45 lb (20 kg)
24" Models 60 lb (27 kg)
30" / 36" Models 75 lb (34 kg)
TALL (DOOR) MAX WEIGHT
30" Models 50 lb (22 kg)
36" Models 60 lb (27 kg)
DRAWER MAX WEIGHT
All Drawer Panels 15 lb (7 kg)
PANEL THICKNESS MINIMUM
All Panels
5
/8" (16)
Reveals between panels can vary,
1
/8" (3) reveals are typical.
CAUTION
When installing a panel thicker than 1" (25), the 90° stop
may be required to prevent damage to the unit and
adjacent cabinetry.
CAUTION
As reveals between cabinetry and the unit decrease,
severe nger pinching can occur while door is closing.
Finish all sides of custom panels. They will be visible when
the door is open.
D-style handles are recommended. Stainless steel tubular
and pro handles are avail able through an authorized
Sub-Zero dealer. For local dealer information, visit the nd
a showroom section of our website, subzero.com. Door
handles must be located near the edge of the panel oppo-
site the hinge and should be centered top to bottom. Drawer
handles must be located near the top edge of each panel.
DUAL INSTALLATION
When installing two units side by side in a dual installa-
tion, the opening width is the width of the two units added
together. A dual installation kit will be required for this
installation.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
PANEL INSTALLATION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sub-Zero IT-36CI and is the answer not in the manual?

Sub-Zero IT-36CI Specifications

General IconGeneral
BrandSub-Zero
ModelIT-36CI
CategoryRefrigerator
LanguageEnglish

Related product manuals