6. MAINTENANCE SCHEDULE
-
11
-
DAILY INSPECTION
Before running the engine, check the following service items.
MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES
AND SYSTEMS MAY BE PERFORMED BY ANY NON-ROAD ENGINE REPAIR
ESTABLISHMENT OR INDIVIDUAL.
Excessive vibration,noise
Clean air cleaner element
Safe surroundings
Enough clean engine oil
Leakage of gasoline and engine oil
Loose or broken bolts and nuts
Enough gasoline
PERIODIC MAINTENANCE
Periodic maintenance is vital to safe and efficient operation of your engine.
Check the table below for periodic maintenance intervals.
IT IS ALSO NECESSARY FOR THE USER OF THIS ENGINE TO CONDUCT
THE MAINTENANCE AND ADJUSTMENTS ON THE EMISSION-RELATED
PARTS LISTED BELOW TO KEEP THE EMISSION CONTROL SYSTEM
EFFECTIVE.
The emission control system consists of the following parts:
The maintenance schedule indicated in the following table is based on the normal
engine operation. Should the engine be operated in extremely dusty condition or in
heavier loading condition, the maintenance intervals must be shortened depending
on the contamination of oil, clogging of filter elements, wear of parts, and so on.
(1) Carburetor and internal
parts
(2) Air cleaner plate
(including choke
sysyem)
(3) Air cleaner cover
(4) Air cleaner element
(5) Fuel Filter
(6) Spark plug
(7) Flywheel magneto
(8) Ignition coil
(9) Hoses and sealing
gaskets, belts, connec-
tors, and assemblies
To Next Page
Loading...
Need help?
General
