4 Mechanical Installation User Manual
10
4.3 Storage
The combiner box should be stored under specific environmental conditions
when not in use:
The combiner box with the outer package should be stored in a ventilated,
dry, and clean indoor environment, with desiccant inside.
The container should be able to withstand the weight of the combiner box
with the package.
The number of stacks of multiple combiner boxes must not exceed the "stack
limit" marked on the outer box.
The packing box must not be inclined or upside down.
The storage environment should be well ventilated and free from moisture.
Accumulated water is not allowed in the storage environment.
Storage temperature range -40℃~+70℃, relative humidity range 0~95%, no
condensation.
Pay attention to possible hazards in the surrounding environment, such as
sudden temperature changes or collisions, to prevent any damage to the
combiner box.
The device which has been stored for more than half a year must be fully
inspected and tested by professionals before it can be put into operation.
Regular inspections, generally not less than once a week. Check that the
packaging is not damaged and prevent any damage that may be caused by
pests and animals. Replace the packaging immediately if it is damaged.
Storage without packaging is prohibited!
Storage outdoors or in direct sunlight is prohibited!
Tilt or stacking on the chassis is prohibited!
Before installing the combiner box which has been stored for a
prolonged period, a thorough inspection is required to ensure the
combiner box is in good condition. If necessary, it must be tested by
professionals before installation.
To Next Page
Loading...
Need help?
General
