2-13
BEFORE DRIVING
84MM6-01E
84MM00249
4) Push the lock end (4) (forward end) of
the central door locking switch (5), and
then push the unlock end (6) (backward
end). Repeat this operation 3 times.
Every time you perform the series of the
above steps, the state of the theft deterrent
alarm system changes from the currently
selected one to the other. You can check
whether the system is enabled or disabled
by the number of interior buzzer beeps at
the end of the procedure as follows.
• If you cannot complete the operations in
step 3) and 4) within 15 seconds cor-
rectly, the state of the theft deterrent
alarm system will not change and the
interior buzzer does not beep. Perform
the procedure again from the beginning.
Theft Deterrent Light
(if equipped)
With tachometer
84MM00208
System state Number of beeps
Disabled
Once
Enabled 4 times