29
To lower the motor back down:
1. Move the tilt lock lever 1 to the lock position.
2. Pull the motor slightly towards you and
slowly let the motor down.
WARNING
When the shallow water position is used, the
tilt lock will not work. As a result, forces such
as from propeller thrust during operation in
“REVERSE” gear, rapid deceleration, and
striking an underwater object can cause the
motor to lift out of the water, resulting in per-
sonal injury.
When using the shallow water position, pro-
ceed with caution and only at very low
speeds.
OPERATION OF TILTING
SYSTEMS
(DF9.9BT/9.9BTH/15ATH/20AT/20ATH)
POWER TILT
The “Power Tilt” is operated by pressing the
switch. To tilt the motor up, press the upper
(right) part of the switch. To tilt the motor down,
press the lower (left) part of the switch.
WARNING
The power tilt (PT) switch can be accidentally
activated when the ignition key is off, result-
ing in injury.
Keep all persons away from the outboard
motor to help prevent accidental activation of
the PT system.
UP
DOWN
UP
DOWN
DOWN
UP
To Next Page
Loading...
Need help?
General
