53
OPERATION
ENGINE SWITCH (OPTION)
Use this switch if equipped with Keyless Start
System.
• Quickly press the engine switch to start and
stop all engines. (The buzzer sounds once.)
• Press and hold the engine switch for at least
2 seconds to set the Keyless Start System
ON state and OFF state. (The buzzer sounds
once.)
IGNITION SWITCH (OPTION)
Use this switch if not equipped with Keyless
Start System.
• Turn until the ignition key is in the “ON” posi-
tion.
• Turning the ignition key to the “START” posi-
tion automatically starts all engines.
OFF
ON
START
CONTROL PANEL (OPTION)
NOTE:
• On a boat equipped with quadruple engines,
use control panel for quadruple engine
(PORT) and control panel for quadruple
engine (STBD).
• On a boat equipped with quintuple engines,
use control panel for quintuple engine
(PORT) and control panel for quintuple
engine (STBD).
• On a boat equipped with sextuple engines,
use control panel for sextuple engine (PORT)
and control panel for sextuple engine
(STBD).
For dual engine For triple engine
For quadruple engine (PORT) For quadruple engine (STBD)
For quintuple engine (STBD)
For quintuple engine (PORT) For sextuple engine (PORT)
For sextuple engine (STBD)
To Next Page
Need help?
General
