33
To lower the motor:
1. Move the release lever 1 to the release
position.
2. Pull the motor slightly towards you and pull
up the tilt lock lever 2.
3. Lower the motor by pushing the motor cover
down.
4. Move the release lever 1 to the “lock” posi-
tion.
WARNING
If you do not take proper precautions when
tilting up the motor, fuel may leak out.
Disconnect the fuel line whenever you leave
the motor tilted up for a long period of time.
NOTICE
If you use the tilt lock lever to hold the motor
in the fully tilted position for trailering, the tilt
lock lever could release resulting in damage
to the motor.
When trailering your boat, never use the tilt
lock lever to hold the motor in the fully tilted
position.
OPERATION OF TILTING
SYSTEMS
(DF25AT/25ATH/30AT/30ATH)
POWER TRIM AND TILT
The “Power Trim and Tilt” is operated by press-
ing the switch. To tilt the motor up, press the
upper (right) part of the switch. To tilt the motor
down, press the lower (left) part of the switch.
WARNING
The power trim and tilt (PTT) switch can be
accidentally activated when the ignition key is
off, resulting in injury.
Keep all persons away from the outboard
motor to help prevent accidental activation of
the PTT system.
To Next Page
Loading...
Need help?
General
