7-28
INSPECTION AND MAINTENANCE
60MK1-82E
High-mount stop light
80J100
To remove a high-mount stop light housing
the following procedure:
1) Open the tailgate, and remove the nuts
(1) as shown in the illustration.
60MH054
2) Close the tailgate. Release the claws
(3) of the light housing by a flat blade
screwdriver, etc. The claws are shown
in the next illustration. Remove a high-
mount stop light housing (2) from the
tailgate.
60MH070
3) Remove the each bulb.
4) Replace the bulbs.
To install a high-mounted stop light
housing in the reverse order of removal.
To Next Page
Loading...
Need help?
General
