Suzuki Ertiga Series User Manual

3-13
OPERATING YOUR VEHICLE
60MK1-82E
Using the Transaxle
4-Speed Automatic Transaxle
60MK202
(1) Overdrive off switch
60MK164
Overdrive off switch
The transaxle is a 4-speed (3-speed plus
overdrive) automatic transaxle. By operat-
ing the overdrive off switch, the transaxle
can be converted to a 3-speed automatic
transaxle that will not move to the over-
drive position. To convert the transaxle to
the 3-speed mode, push in the overdrive
off switch and release it.
To return the transaxle to the 4-speed
mode, push in the overdrive off switch
again.
When the engine switch is pressed to
change the ignition mode to “ACC”, the
transaxle in the 3-speed mode is con-
verted to the 4-speed mode automatically.
The 3-speed mode is suitable for the fol-
lowing driving conditions:
• Driving on hilly, winding roads
– You can drive more smoothly with less
frequent gear changing
• Going down a steep hill
– Some engine braking is provided
Gearshift lever
60MK165
(1) knob button
The gearshift lever is designed so that it
cannot be shifted out of the “P” position
unless the ignition mode is “ON” and the
brake pedal is depressed.
(1)
EXAMPLE
EXAMPLE
WARNING
Always depress the brake pedal
before shifting from “P” (Park) (or
“N” (Neutral) if the vehicle is station-
ary) to a forward or reverse gear, to
help prevent the vehicle from moving
unexpectedly when you shift.
(1)
EXAMPLE

Suzuki Ertiga Series Specifications

General

Brand	Suzuki
Model	Ertiga Series
Category	Automobile
Language	English