Suzuki Ertiga Series User Manual

3-10
OPERATING YOUR VEHICLE
60MK1-82E
Starting the Engine
Before Starting the Engine
60MK162
1) Make sure the parking brake is set fully.
2) If the gearshift lever is not in the “P”
(Park) position, shift it to “P”. Hold the
brake pedal fully depressed.
82K254
3) The “PUSH” indicator light in the instru-
ment cluster will come on. Push the
engine switch (1). When the engine is
started, the starter motor will automati-
cally stop.
NOTE:
• You do not need to keep the engine
switch pressed to start the engine.
• Automatic transaxle vehicles have a
starter interlock device which is
designed to keep the starter from operat-
ing if the transaxle is in any of the drive
positions.
• You should turn off such loads as the
headlights and air conditioning system to
facilitate starting of the engine.
• Even if you fail to start the engine, the
starter motor will stop turning automati-
cally after a short time. After the starter
motor has stopped or if there is some
problem with the system, the starter
motor will rotate only while the engine
switch is being pressed.
WARNING
Make sure that the parking brake is
set fully and the transaxle is in Park
before attempting to start the engine.
(1)
NOTICE
• Do not depress the accelerator
during the engine starting proce-
dure.
• If the engine does not respond
when you try to start it with the
engine switch or if the engine
switch repeats cycling through the
“LOCK”(OFF) - “ACC” - “ON”
mode, the vehicle battery may be
discharged. Check the voltage of
the vehicle battery before trying
again.

Suzuki Ertiga Series Specifications

General

Brand	Suzuki
Model	Ertiga Series
Category	Automobile
Language	English