6-40
REAR WHEEL REMOVAL
1. Place the motorcycle on the side
stand.
2. Remove the axle nut 1.
3. Place an accessory service stand
or equivalent under the swingarm
to lift the rear wheel slightly off the
ground.
4. Loosen the right and left chain
adjuster nuts 2.
5. Draw out the axle shaft.
6. With the wheel moved forward,
remove the chain from the
sprocket.
! CAUTION
A hot muffler can burn you.
Wait until the muffler cools before
removing the axle nut.
NOTICE
Removing the rear wheel without
use of an accessory stand can
result in your motorcycle falling
over and being damaged.
Do not attempt roadside removal
of the rear wheel. Only remove the
rear wheel at a properly equipped
servicing facility using an acces-
sory service stand.
To Next Page
Loading...
Need help?
General
