5-34
HEADLIGHT
To replace the headlight bulb, use
the following procedure:
1. Remove the rubber cap 1.
2. Remove the socket cover 2.
3. Disconnect the socket 3.
4. Unhook the bulb holder spring
4 and pull out the bulb 5.
5. To replace the headlight bulb,
reverse the above sequence.
CAUTION
Touching the headlight bulb
glass with a bare hand may
damage the bulb.
The bulb’s life may be short-
ened by oil from your fingers if
you touch it.
When replacing the headlight
bulb, be careful not to touch
the glass. Grasp the new bulb
with a clean cloth.
To Next Page
Loading...
Need help?
General
