2-9
SELECTION LEVER (LT-F400F)
The selection lever is used for
changing the manner in which
engine power is supplied to the
wheels. Select 2WD or 4WD
according to surface conditions.
2WD: Engine power is supplied
only to the rear wheels. Use this
position for normal riding on dry,
hard surfaces.
4WD: Engine power is supplied to
the front and rear wheels, and the
right front wheel and left front
wheel can turn at different
speeds. This position provides
more traction than 2WD and
should be used for riding on slip-
pery surfaces.
To shift the selection lever:
1. Stop the vehicle completely.
2. Move the selection lever to the
desired position.
2WD 4WD
WARNING
Shifting the selection lever
when the ATV is moving can be
hazardous.
Removing a hand while riding
can lose control. Shifting the
selection lever while ATV is
moving can damage the shift-
ing mechanism.
Always come to a complete
stop before shifting.
To Next Page
Loading...
Need help?
General
