3-5
Check the condition of the ATV to
help make sure that you do not
have mechanical problems, or you
might get stranded somewhere
when you ride. Before riding the
ATV, be sure to check the follow-
ing items. Be sure your LT-F400/F
is in good condition for the per-
sonal safety of the rider and pro-
tection of the vehicle.
WARNING
Overloading this ATV can be
hazardous.
Overloading could cause
changes in vehicle handling
which could lead to an accident.
Never exceed the stated load
capacity for this ATV. Refer to
the ACCESSORY USE AND
VEHICLE LOADING section in
this manual.
WARNING
Checking maintenance items
when the engine is running can
be hazardous.
You could be severely injured if
your hands or clothing gets
caught in moving engine parts.
Shut the engine off when per-
forming maintenance checks,
except when checking the light,
engine stop switch, and throttle.
WHAT TO
CHECK
CHECK FOR
Steering 1. Smoothness
2. No restriction of
movement
3. No play or looseness
Brakes 1. Fluid level in the reservoir
to be above “LOWER” line
2. No fluid leakage or
damage
3. Proper pedal and lever
play
4. No “sponginess”
5. Parking brake
effectiveness
Tire 1. Proper pressure
2. Enough tread depth
3. No cracks, rips or other
damage
Fuel 1. Enough fuel for the
intended run
2. Fuel hose connected
securely
3. No damage to fuel tank or
cap
4. Tank cap closed securely
Lighting Proper operation of all lights
– Headlight, Brake/Taillight
Engine stop
switch
Proper operation
Engine oil Correct level
Gear oil Correct level
Throttle 1. Proper cable play
2. Smooth response
3. Quick return to idle
position
Gearshift
lever
1. No damage
2. Smooth operation
General
condition
1. Bolts and nuts are tight
2. No rattle from any parts of
the machine with the
engine running
3. No visible evidence of
damage
To Next Page
Loading...
Need help?
General
