113
6
6-1. Phone operation (Hands-free system for cellular phones)
Phone
COROLLA_HV(TMUK)_OEM_MM_(EE)
2 Check that a confirmation
screen is displayed when the
operation is complete.
■
For PBAP incompatible but
OPP compatible Bluetooth
®
phones
1 Select the desired item.
Select to transfer the contacts
from the connected cellular
phone.
Transfer the contact data to the
system using a Bluetooth
®
phone.
Select to add a new contact
manually.
Follow the steps in “Registering
a new contact to the contacts
list” from step 2. (P.127)
Select to cancel transferring.
●
If your cellular phone is neither PBAP
nor OPP compatible, the contacts
cannot be transferred using
Bluetooth
®
. But the contacts can be
transferred from USB device.
(P.126)
●
Depending on the type of Bluetooth
®
phone:
• It may be necessary to perform addi-
tional steps on the phone when trans-
ferring contact data.
• The registered image in the contact
list may not transfer depending on the
type of Bluetooth
®
phone connected.
1 Display the phone top screen.
(P.106)
2 Select “Keypad” and enter the
phone number.
3 Select or press the
switch on the steering wheel.
4 Check that the dialing screen is
displayed.
●
Depending on the type of Bluetooth
®
phone being connected, it may be
necessary to perform additional steps
on the phone.
1 Display the home screen.
(P. 19)
2 Select the desired contact.
3 Check that the dialing screen is
displayed.
■
Registering a new contact
1 Select and hold the screen but-
ton to add a contact.
2 Select the desired contact.
3 Select the desired number.
●
If there is no contact in the contacts
list, the contacts cannot be registered
at the home screen.
●
The contact cannot be registered at
the home screen while driving.
A
C
By keypad
By home screen
To Next Page
Loading...
Need help?
General