116
6-1. Phone operation (Hands-free system for cellular phones)
COROLLA_HV(TMUK)_OEM_MM_(EE)
machine or bank phone service is
desired. A phone number with contin-
uous tone signals can be registered in
the contact list.
1 Select “Transmit volume”.
2 Select the desired level for the
transmit volume.
3 Select to display previous
screen.
●
The sound quality of the voice heard
from the other party’s speaker may be
negatively impacted.
●
“Transmit volume” is dimmed when
mute is on.
When there are no calls on hold
during a call: “Hold” is displayed.
When selected, the current call is
placed on hold.
When there is no current call, but
there is a call on hold: “Activate”
is displayed. When selected, the
system switches to the call that
was on hold.
When there is another call on
hold during a call: “Swap calls” is
displayed. When selected, the
current call is placed on hold,
and the system switches to the
call that was on hold.
●
This function may not be available
depending on the type of Bluetooth
®
phone.
When a call is interrupted by a third
party while talking, the incoming
screen is displayed.
1 Select “Answer” or press the
switch on the steering wheel to
start talking with the other party.
To refuse to receive the call:
Select “Decline”.
Each time “Swap calls” is
selected, the party who is on
hold will be switched.
●
This function may not be available
depending on the type of Bluetooth
®
phone.
Transmit volume setting
Switching calls while a call
is in progress
Incoming call waiting
To Next Page
Loading...
Need help?
General