EasyManuals Logo
Home>Suzuki>Automobile>Swift

Suzuki Swift Owner's Manual

Suzuki Swift
316 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
2-80
BEFORE DRIVING
57RK0-14E
Information switch
(if equipped)
You can use the information switch to
switch the display indication when the igni-
tion switch is in “ON” position or the igni-
tion mode is ON and the vehicle is
stationary.
52R31310
(1) Information switch
(2) Indicator selector knob
To switch to the setting mode
1) Push and hold the information switch
(1) when the vehicle is stationary.
2) After the display of setting mode is
shown, select the setting item that you
want to change by turning the indicator
selector knob (2) left or right. Refer to
“Setting mode” in this section for
details.
NOTE:
If you switch to the setting mode while
either of the following items is shown on the
information display, the current value will be
reset. If you do not want to reset its value,
push the indicator selector knob (2) quickly
beforehand and switch to the other item.
Average fuel consumption
Average speed (if equipped)
Driving time (if equipped)
Total idling stop time and total idling stop
fuel saved (if equipped)
To exit the setting mode
1) Push the indicator selector knob (2)
and select “Back”.
2) Push the information switch (1) quickly.
NOTE:
You can exit the setting mode by either of
the following operations:
Turn the ignition switch to “ACC” or
“LOCK” position.
Press the engine switch to change the
ignition mode to ACC or LOCK (OFF).
Start driving your vehicle.
Warning and indicator lights
NOTE:
If warning and indicator lights blink or
come on, the corresponding messages
may be shown on the information display.
Brake system warning light
82K170
Three different types of operations exist
depending on the vehicle’s specification.
The light comes on briefly when the igni-
tion switch is turned to “ON” position or
the engine switch is pressed to change
the ignition mode to ON.
The light comes on when the parking
brake is engaged with the ignition switch
in “ON” position or the ignition mode is
ON.
The light comes on under either or both
of above two conditions.
The light also comes on when the fluid in
the brake fluid reservoir falls below the
specified level.
(1) (2)
EXAMPLE

Table of Contents

Other manuals for Suzuki Swift

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Suzuki Swift and is the answer not in the manual?

Suzuki Swift Specifications

General IconGeneral
BrandSuzuki
ModelSwift
CategoryAutomobile
LanguageEnglish

Related product manuals