2-105
BEFORE DRIVING
83RM0-01E
Turn Signal Operation
With the ignition switch in the “ON” position
or the ignition mode “ON”, move the lever
up or down to activate the right or left turn
signals.
Normal turn signal
61MM0A076
Move the lever all the way upward or
downward to signal. When the turn is com-
pleted, the signal will cancel and the lever
will return to its normal position.
Lane change signal
61MM0A077
Move the lever part-way in the direction to
turn and hold it there.
• The turn signal and its indicator flash
while the lever is held at the moved posi-
tion.
The turn signal and its indicator flash three
times even if you return the lever immedi-
ately after moving it.
NOTE:
The turn signal and its indicator can be set
whether they flash three times after the
turn signal lever is returned via the infor-
mation display. Refer to “Information Dis-
play” in this section.
NOTE:
You can customize the setting for the num-
ber of times of flashing of the turn signal
and its indicator (1 to 4 times). Please ask
an authorized SUZUKI dealer for the cus-
tomization.
To Next Page
Loading...
Need help?
General
