3-68
OPERATING YOUR VEHICLE
83RM0-01E
Rearview Camera (if equipped)
When the gearshift lever is shifted to the
“R” position while the ignition switch is in
the “ON” position or the ignition mode is
“ON”, the rearview camera system auto-
matically shows the view behind the vehi-
cle on the display.
Rearview Camera Location
61MM0B011
(1) Rearview camera
The rearview camera is installed beside
the license plate light.
WARNING
The distance viewed in the rearview
camera may differ from the actual
distance according to the condition
of road or the load the vehicle is car-
rying. Since the camera display area
is also limited, backing up by only
looking at the display may cause an
accident or a collision with an object.
The rearview camera cannot replace
the driver’s attention. The driver
alone is responsible for parking and
similar driving maneuvers.
• Use the rearview camera only to
provide driving assistance.
• Always drive carefully confirming
the safety of the rear and the sur-
rounding conditions by looking
directly with your eyes and using
the rear view mirror.
• Make sure that the tailgate is
securely closed when backing up.
NOTICE
If you use the rearview camera for a
long time when the ignition switch is
in the “ON” position or the ignition
mode is “ON”, but the engine is not
running, the battery may discharge.
Do not leave the ignition switch in the
“ON” position or the ignition mode
“ON” for a long time when the engine
is not running.
NOTICE
The rearview camera is a precision
instrument. If you strike the camera,
it may be broken and cause damage
resulting in a catching fire or a mal-
function.
• Do not strike the camera.
• Do not remove snow or mud on the
camera lens with a stick.