Suzuki SX4 2016 User Manual

3-43
OPERATING YOUR VEHICLE
83RM0-01E
For more details, refer to the explanation
below.
Automatically Stopping the Engine
Manual transaxle models
1) With the clutch pedal fully depressed,
stop the vehicle.
61MM701
2) While depressing the brake and clutch
pedal, place the gearshift lever in the
“N” (Neutral) position.
83RM075
3) Release the clutch pedal.
The “ENG A-STOP” indicator light
(green) (1) in the instrument cluster will
illuminate and the engine will stop auto-
matically.
NOTE:
The ENG A-STOP system will not operate
and engine does not stop automatically
under the following conditions:
• The “ENG A-STOP OFF” switch is
pressed to deactivate the ENG A-STOP
system.
• The “ENG A-STOP OFF” light blinks.
• Engine coolant temperature is either low
or high.
• Vehicle battery performance is low.
• The temperature of the vehicle battery is
either low or high.
• Brake booster vacuum pressure is low.
• Depressing the accelerator pedal.
• Blower speed selector is set to the “ON”
mode and the inside of the vehicle has
not sufficiently cooled and warmed (for
the vehicle with automatic air condition-
ing).
• The defrost switch is set to the “ON”
mode (for the vehicle with automatic air
conditioning).
• During or after the ABS or ESP
®
system
is activated, and the vehicle is stopped.
• During the first period use, to initialize
the system.
• After the engine restarted automatically,
and the vehicle speed had not exceeded
approximately 6 km/h.
• When the engine is started with the hood
open.
• When the vehicle is stopped after back-
ing up.
• The signal to prevent stopping the
engine is received from any electronic
control systems other than the ENG A-
STOP system.
EXAMPLE
NOTICE
The brake booster becomes inoperative
and the pedal effort will increase when
the engine is stopped automatically.
If the vehicle is moving, press down
the brake pedal harder than usual.
(1)

Suzuki SX4 2016 Specifications

General

Brand	Suzuki
Model	SX4 2016
Category	Automobile
Language	English