9-4
• Repair finish damage as soon
as possible. Carefully exam-
ine your motorcycle for dam-
age to the painted surfaces.
Should you find any chips or
scratches in the paint, touch
them up immediately to pre-
vent corrosion from starting. If
the chips or scratches have
gone through to the bare
metal, have a Suzuki dealer
make the repair.
• Store your motorcycle in a dry,
well-ventilated area. If you
often wash your motorcycle in
the garage or if you frequently
park it inside when wet, your
garage may be damp. The
high humidity may cause or
accelerate corrosion. A wet
motorcycle may corrode even
in a heated garage if the venti-
lation is poor.
• Cover your motorcycle. Expo-
sure to mid-day sun can cause
the colors in paint, plastic
parts, and instrument faces to
fade. Covering your motorcy-
cle with a high-quality, “breath-
able” motorcycle cover can
help protect the finish from the
harmful UV rays in sunlight,
and can reduce the amount of
dust and air pollution reaching
the surface. Your Suzuki
dealer can help you select the
right cover for your motorcycle.
MOTORCYCLE CLEANING
Washing the Motorcycle
When washing the motorcycle,
follow the instructions below:
1. Remove dirt and mud from the
motorcycle with cool running
water. You may use a soft
sponge or brush. Do not use
hard materials which can
scratch the paint.
2. Wash the entire motorcycle
with a mild detergent or car
wash soap using a sponge or
soft cloth. The sponge or cloth
should be frequently soaked in
the soap solution.
NOTE: Clean the motorcycle with
cool water immediately after
riding on road salt or riding along
the coast. Be sure to use cool
water because warm water can
hasten corrosion.
NOTE: Avoid spraying or allowing
water to flow over the following
places:
• Ignition switch
• Spark plugs
• Fuel tank cap
• Fuel injection system
• Brake master cylinders
• Throttle cable boots
To Next Page
Loading...
Need help?
General
