7-37
4. Reinstall the drain plug and tighten
it securely after all the oil has been
drained out. Hold the motorcycle
vertically and pour fresh oil through
the filler hole until the oil level
reaches the oil filler hole. Approxi-
mately 200 – 220 ml (6.8 – 7.4 US
oz) of oil will be required.
5. Reinstall the oil filler cap.
NOTE: Recycle or properly dispose of
used oil and solvent.
!WARNING
Operating the motorcycle with too little
final gear oil can cause the final drive unit
to lock up and cause an accident.
Check for leaks and correct level of final
gear oil before each use and add oil if nec-
essary. Tighten the drain plug securely
after changing the gear oil.
!WARNING
New and used oil and solvent can be haz-
ardous. Children and pets may be harmed
by swallowing new or used oil or solvent.
Continuous contact with used engine oil
has been found to cause skin cancer in lab-
oratory animals. Brief contact with used oil
or solvent may irritate skin.
• Keep new and used oil and solvent away
from children and pets.
• Wear a long-sleeve shirt and waterproof
gloves.
• Wash with soap if oil or solvent contacts
your skin.
VS1400GLP03A.bookPage37Friday,October29,20042:01PM
To Next Page
Loading...
Need help?
General
