7-52
Front axle tightening torque:
44 N·m (4,4 kgf-m, 32,0 lb-ft)
Front axle holder bolt tightening torque:
23 N·m (2,3 kgf-m, 16,5 lb-ft)
REAR WHEEL REMOVAL
1. Place the motorcycle on the side
stand.
!WARNING
Failure to torque bolts and nuts properly
could lead to an accident.
Torque bolts and nuts to the proper specifi-
cations. If you are not sure of the proper
procedure, have your authorized SUZUKI
dealer or qualified mechanic do this.
!WARNING
A hot muffler can burn you. The muffler will
be hot enough to burn you for some time
after stopping the engine.
Wait until the muffler cools to avoid burns.
VS1400GLP03A.bookPage52Friday,October29,20042:01PM
To Next Page
Loading...
Need help?
General
