7-48
To tighten the spoke nipples properly,
tighten them equally to the specified
torque. Loose and overtightened spoke
nipples may cause unequal spoke ten-
sion and may result in wheel rim distor-
tion. Contact your authorized Suzuki
dealer or qualified mechanic for this
service.
SIDE STAND/IGNITION INTER-LOCK
SYSTEM
Check the side stand/ignition interlock
system for proper operation as follows:
1. Sit on the motorcycle in the normal
riding position, with the side stand
up.
2. Shift into first gear, hold the clutch
in, and start the engine.
3. While continuing to hold the clutch
in, move the side stand to the down
position.
VS1400GLP03A.bookPage48Friday,October29,20042:01PM
To Next Page
Loading...
Need help?
General
