Suzuki VS1400 - Page 146

9-10
NOTE: Avoid spraying or allowing water
to flow over the following places:
• Ignition switch
• Spark plugs
• Fuel tank cap
•Carburetors
• Brake master cylinders
3. Once the dirt has been completely
removed, rinse off the detergent
with running water.
4. After rinsing, wipe off the motorcy-
cle with a wet chamois or cloth and
allow it to dry in the shade.
5. Check carefully for damage to
painted surfaces. If there is any
damage, obtain “touch-up” paint
and “touch-up” the damage follow-
ing the procedure below:
a.Clean all damaged spots and
allow them to dry.
b.Stir the paint and “touch-up” the
damaged spots lightly with a
small brush.
c. Allow the paint to dry completely.
CAUTION
Radiator and oil cooler fins can be dam-
aged by spraying high pressure water on
them.
Do not spray high pressure water on the
radiator and oil cooler fins.
VS1400GLP03A.bookPage10Friday,October29,20042:01PM