6
PLACEMENT OF WARNING STICKERS
WARNING STICKERS are placed on the machine as reminders to operate your equipment safely. When
operating your machine, be sure to observe the directions on ANY warning stickers.
[View from the right-front]
[View from the left-front]
WARNING
· Burn or death may be caused
by high voltage electric shock.
· Don’t open the cover except
for service man assigned by
SWF.
· When open the cover turn off
power and wait for 6 minutes.
WARNING
· Injury may be caused by winding.
· Be sure to check that safety
cover is attached before running
machine.
· Don’t put your hands near the
moving parts while machine is
running
· Physical damage may be caused
by winding.
· Don’t put your hands near the
arrow while the main shaft is
rotating
WARNING
· Physical injury may be
caused by crevice.
· Don’t put your finger in a
chink on the table.
WARNING
· Injury may be caused by
moving needle.
· Ensure that the machine is in a
stop condition before changing,
threading or rethreading of
needle or changing of needles.
WARNING
To Next Page
Loading...
Need help?
General
