8
§OPERATION OF IGNITION SWITCH §
§DESCRIPTION OF ANTI THEFT INTELLIGENT LOCK(for Intelligent lock model )§
1.
Set the anti-theft： When motorcycle ignition lock is off
1.Sound and light warning : Press the remote control once, the horn will sound a warning tone, the
direction. light will flash once, and the lock will be locked. After 3 seconds, it will enter the sound and
light warning state.
Silent alert: Press the mute key of the remote control once, the horn will sound, the direction light will
flash once, the lock will be locked, and it will enter the silent alert state after 3 seconds.
2. Remove anti-theft alert and automatic recovery alert
On alert: Press the release key of the remote control, the horn will sound twice, the direction light will
flash twice, the lock will be unlocked, and the alert will be released. (Normal unlocking)。If the main
switch is not turned on or the vehicle does not sense vibration within 30 seconds, the alarm system will
be regarded as false release and will automatically return to the original anti-theft alert state. (If you
press the unlock key by mistake, it will be locked automatically)
Remove anti-theft and automatic recovery alert.
● careful ：Press the release key twice in 2 seconds to completely release the alarm, and it will not
automatically return to the alert state.
3. Automatic lock when turning from on to off
In the released state: stop and turn off the engine (turn off the main switch), After20 seconds, it will
automatically lock and enter the silent alert.
4. Automatic lock
When the main switch is off ：When the main switch is turned from off to lock, the lock will be locked
automatically after one second, and then it will enter the sound and light warning state after three seconds.
(The handle locks automatically) .
In lock state ：Press the release key of the remote control once, and if it does not exit lock within 15
seconds, it will automatically return to the alert state.(If you press the unlock key by mistake, it will lock
automatically).
In lock state, Press the release key twice in 2 seconds. If it cannot be removed completely, it will
automatically return to the original anti-theft alert state (sound and light warning state or silent alert state)
In the released state, When the main switch is turned from off to lock，and it will lock automatically after 15
seconds ,and enter the silent alert state, Press the release key twice in 2 seconds to completely release
the alarm, and it will not automatically return to the alert state.
IGNITION SWITCH
CAUTION:
This model is equipped with a smart lock. If the smart lock cannot be released in case of
abnormal conditions, please turn on the switch key to release it.
Smart key(remove the
key after pressing the
switch)
To Next Page
Loading...
Need help?
General
