27
This is the system clock screen.
Line 2 allows the operator to set the local me in a 24 hour format.
Line 3 and 4 allow the operator to set the current date.
The date and me are used for the error log. A small baery on the power board should keep the clock and
calendar running if the machine loses power, but it will need to be replaced eventually. Refer to the mark-
ings on the baery for replacement info.
Menu Level 2: System Clock
Menu Level 2: Heang Elements
The steam element requires a lot of power to heat. We split the load onto 2 parallel circuits, each with their
own relay, which can be deacvated independently here. This is useful for some troubleshoong.
Leave both lines in ACTIVE mode unless circumstances warrant.
You may also turn o the brew elements. This is helpful when cooling the machine or troubleshoong.
Leave the brew elements acve under normal circumstances.
PROGRAMMING
To Next Page
Loading...
Need help?
General
