6 To download the app
Download and install the SAVE CONNECT app
from Google Play
1
or the App store
2
.
Follow instructions on the SAVE CONNECT app
to complete the connection procedure.
7 Troubleshooting
7.1 To reset to default settings
1. Disconnect the cable (B) from the SAVE
CONNECT module.
2. Press and hold the button on the SAVE CON-
NECT module and while the button is
pressed, reconnect the cable.
The LED will start to flash in red colour.
3. Continue to hold down the button until the
LED stops to flash (~10 seconds) and then
release the button.
16
1. Google Play and the Google Play logo are trademarks of Google LLC.
2. App store and Apple logo are trademarks of Apple Inc.
To Next Page
Loading...
Need help?
General