1
Components of the T2000II Radio Kit
The T2000II Radio kit includes the following parts:
l T2000
II Radio Unit
l Microphone
l Complete Cradle
l 4 Ohm Speaker (not for internal speaker models)
l Installation Kit: - Two-way hermaphroditic connector (1)
- Socket receptacle (2)
- 10A 12V Blade fuse (2)
- Inline crimp fuse holder (2)
- Self tapping screw (4)
- Shakeproof washer (4)
- Microphone clip kit (1)
- Control head mounting bracket (T2020
II and T2040II only)
Recommended Installation Tools
l Portable Drill
l Centre Punch
l Drill Bits: 4mm for self-tapping screws, 6mm for nuts and bolts
l “Pozidriv” Screwdrivers
l BNC Crimp Tool (e.g. Transradio England Duo crimp 894)
l In-line Power Meter capable of measuring forward and reflected power at the operating
frequency of the radio
l Hammer
l BNC Antenna Crimp Plug
l Cradle Keys (2)
l Power Cable (5m)