Tait TA2922 User Manual

TA2922 Universal Line Interface Service Manual 45
© Tait Electronics Limited March 2010
Beep Count How many beeps are announced in each transmission period. If this value is set to
zero, the beep pattern is repeated endlessly during the transmission, or during the
TX tail time if Only During Tail is checked.
Adjustable between 0 and 255
Functions
Debug Opens a window which displays the raw serial communications from the TA2922
board.
Monitor Opens the real time monitor window. When 'Start' is clicked in the real time
monitor window, the real time states of the TA2922 analogue and digital lines are
displayed.
Note that the audio level monitor is an approximate guide only and only applies
to line out (receiver) audio. Indicates audio level to +/- 3dB in the range of
-10dBm and +6dBm.
Read Reads the data from a TA2922 board and displays in the window of the PGM-UIS
application. Note that if the Powerup Serial Timer is enabled, the radio must be
switched on and then the data written before the Powerup Serial Timer expires.
Write Writes the data displayed in the window to the TA2922 board. Note that if the
Powerup Serial Timer is enabled, the radio must be switched on and then the data
written before the Powerup Serial Timer expires.

Tait TA2922 Specifications

General

Brand	Tait
Model	TA2922
Category	Computer Hardware
Language	English