Tait TB7300 User Guide

8 General Safety and Compliance Information Transportable Base Station/Repeater User’s Guide
© Copyright Tait International Limited December 2020
1.2 Equipment Safety
1.2.1 Installation and Servicing Personnel
The equipment should be installed and serviced only by qualified
personnel.
1.2.2 Preventing Damage to the PA
The repeater has been designed to operate safely under a wide range of
antenna loading conditions. Transmitting into a low VSWR will maximize
the power delivered to the antenna.
Notice Do not remove the load from the TB7304 while it is transmit-
ting.
Load transients (switching or removing the load) can damage the PA output
stage. See MBD-00001-xx TB7300 Installation and Operation Manual,
especially section 5.4, for recommendations.
1.3 Environmental Conditions
1.3.1 Operating Temperature Range
The operating temperature range of the equipment is –22°F to +140°F
(–30°C to +60°C) ambient temperature with external DC, battery isolated,
or –22°F to +122°F (–30°C to +50°C) ambient temperature with internal
battery and AC input.
Note Ambient temperature is defined as the temperature of the air at the
intake to the cooling fans.
1.3.2 Humidity
The humidity should not exceed 95% relative humidity through the
specified operating temperature range.
1.3.3 Dust and Dirt
For uncontrolled environments, the level of airborne particulates must not
exceed 100µg/m
3
.

Tait TB7300 Specifications

General

Brand	Tait
Model	TB7300
Category	Accessories
Language	English